+38 (050) 777-09-90

UA | KZ | RU | EN

Deck Hammer Crusher

 

  • dec_eng_01
  • dec_eng_01

Like all types of hammer crushers, deck hammer crusher can be used for grinding of any soft materials and materials of medium strength and fragility. These include chalk, gypsum, asbestos, coal and lignite, brick fight, marl, hard limestone and much more. But it comes to crushing of crop or wood wastes, which tend to have a higher moisture, the best choice would be a (twin) deck hammer crusher. The complexity of the production process of crushing wet raw materials is that there is its adhesion to the surface of the working bodies. Deck hummer crusher (twin deck hammer mill) copes with this problem, because it has been developed from conventional hammermill primarily for these purposes. Therefore, for grinding chips, shavings, veneers, pieces of bark, small lump wood waste or any plant material to the desired size, with the raw material moisture content at 80%, the choice is straightforward - twin deck hammer crusher.

Given this undeniable plus of deck hammer crushers, they are often used in the timber industry, which in addition to lumber produce OSB, plywood or veneer. Besides, deck hammer mills are constantly used by manufacturers of fuel pellets or briquettes, in the composition of briquetting process lines for secondary crushing of raw materials of any moisture. These crushers can be also used to work on the crushing of sunflower and corn stalks, animal feed and mineral feed mixtures, lignin.

Deck hammer crusher has a number of advantages: simplicity and ease of maintenance. The main working parts of the crusher are hammers. That is why, they often require inspection or replacement, as the main load during the crushing falls on them. Therefore, a simple and convenient design of the crusher, with minimal time and effort, offers easy access to the hammers to inspect them, turn or replace.

 

Technical characteristics

 

Model

CH-4D

1.

Productivity, kg / h

1000

2.

Diameter of the rotor, mm

443

3.

Number of hammers, pieces

64

4.

Dimensions of the loading chute, mm

250х700

5.

Diameter of holes in the lattice, mm

0-6

6.

Power, kW

25

  voltage,

380

  frequency, Hz

50

7.

Fan

ВРП-5-45 №3,15 3 kW

8.

Dimensions

 

 

Height, mm

975

Width

1200

Length, mm

1750

9.

Weight, kg

800

 

Price list

 

 

Deck crusher in combination with a cyclone

Crushing of raw materials is an important stage in the chain of technological processes of processing and production. The use of crushed or milled materials contributes to the acceleration of firing, dissolution, chemical treatment, etc. due to the fact that the surface of the processed material is significantly increased.

When grinding with materials of increased brittleness and with very light brittleness by means of a hammer mill, there arises a problem to collect the recycled material without losses and without the formation of a suspension of ground particles in the air of the working room. Such issues require solution when working with charcoal, fossil coal of low humidity (anthracite), dry lime, chalk, limestone, etc.

We offer a set of equipment that minimizes the negative component of dry grinding. The complex includes a deck hammer crusher, designed for fine crushing of any brittle materials, even high humidity. This crusher also successfully copes with raw materials of vegetable origin without sticking material on the working tool. The crushed mass is pumped into the cyclone-soot by means of injected air, but from there to the receiving hopper or directly to the forced-action mixer or to another processing phase, if this is subsequently required by the process technology.

 

Model (with a cyclone)

HC-2C

HC-4C

Productivity, kg/h

500-2500

1000-5000

Diameter of the rotor, mm

445

445

Number of hammers, pcs.

32

64

Loading tray, mm

350х250

700х250

Diameter of holes in the grate, mm

6

6

Parameters of power supply network, V / Hz

380 / 50

380 / 50

Power of electric drive of crusher, kW

15

22

Fan of pneumatic conveyor

ВЦП 5-45 №3,15

ВЦП 5-45 №4

Fan drive power, kW

3

5,5

Cyclone size-type

Ц-300

Ц-600

Sizes of sluice shutter

ШП-150

ШП-250

Capacity of gate sluice drive, kW

0,37

0,75

Total electric power, kW

18,37

28,25

Overall dimensions, mm

3500х2000х3750

4000х2500х4500

Weight, kg

750 кг

1000 кг