+38 (050) 477 83 88

D 40-80 MM


ash 8-12%, volatile 40-48%,

moisture 10-14%, sulfur 0.4-0.8%

calorific value 6000 kcal/kg


Price list

Coal pellets



Coal briquettes


Coal briquettes Pini&Kay


Roller Press

sl3In a large family of briquetting presses, roll press stands out for its versatility. With this briquette press you can use almost any fine or large materials. Simple, reliable design, high performance and low power consumption are the qualitative characteristics of roll press allowing it to take its rightful place among the other types of briquette equipment.


Extrusion (Auger) Press

sl3Our company has a whole line of extrusion (auger) presses of PAE series of different capacity and performance. Depending on the kind of raw material, size and power performance, equipment may produce 10 Ton of finished product per hour per press. It should be noted that with this design of presses, virtually any small fraction and bulk materials can be briquetted, if using additive binders during the preparation of raw mix, which after drying and cooling of briquette, determine its quality, strength and resilience.



sl3Conveyor dryers are one of the most important elements in the conveyor technology, satisfying its main requirement – route of production. Belt driers are used for drying materials such as granules, fibers, briquettes, pieces, vegetables and agriculture products. Heated air acts as a drying agent. Drying of the granules and similar materials is carried out in the most efficient way. In addition to traditional heating elements, our Company uses infrared emitters as heating elements. They increase the heating efficiency and speed up the drying process, reducing energy consumption.



sl3Impact mechanical press is designed for the production of fuel briquettes from wood waste (sawdust, shavings, shredded branches), sunflower husk, rice, buckwheat, oats, chopped straw crops. This press can be used in production lines.


Press for Briquettes of Pini&Kay Standard

sl3Our company manufactures extrusion presses with thermosetting die for the production of briquettes of Piny&Key standard. But not only sawdust and a variety of crop waste is used as raw material, but also dust of charcoal, which inevitably accumulates during production process. Also, our presses are suitable for briquetting coals dust, peat, lignin, animal manure. The fact that cheap and affordable energy sources, most of which are just a waste, can be used as raw material in the production, makes the production of fuel briquettes very attractive.


Auger Feed (Extrusion) Granulator

cenAuger feed granulator (extrusion granulator) is an effective equipment for production of fuel pellets, granular fertilizers and feed mixtures. It is designed by our company based on the extruder press PBE. It has the same basic advantages: high efficiency (up to 5000 kg/h), reliability, ease of operation and maintenance, no need to use binding agents when pelleting materials such as peat, lignin, coal, lime, bird droppings, animal manure, grain wastes, compound feed.


Auger Separator Desiccator

sl3Auger Separator Desiccator (screw separator dehydrator) is machine, which consists of a screw assembly, equipped with a drum sieve of grate type and a squeeze locking mechanism. Drying material with moisture content of 85-95% is fed into the separator body. Working screw in conjunction with locking mechanism create within the material the radial and axial pressure. Under its action, liquid fraction is forced through the sieve drum cell, and the solid fraction is fed forward and is removed through the blinds shut-forcing mechanism. At the same time, due to the small gap (0.1 mm) between the edges of auger blades and mesh grate, there occurs self-cleaning of drum sieve cells and the removal of fine particles of solids from the extraction zone. The separator body has a cavity for storage and removal of the separated liquid fraction.
At the outlet from the separator, solid fraction humidity up to 60% is provided.
Equipment is widely used in agriculture for processing manure (cattle, pig) and bird droppings. Also, it is used to effectively dehydrate various waste from the food industry, alcohol bard, brewer's grain, contaminated drains, etc.


Industrial shredder

sl3Industrial shredders manufactured by our company are used for pre-crushing of a wide variety of industrial and household waste, lumpy or any size materials. For example, using shredders can shred wood waste from processing industry, furniture, household appliances, municipal solid waste, various polymers and plastic products, paper, cardboard, rubber, woven fabrics, and more.


Hammer Crusher

sl3Hammer crusher machines for grinding and crushing any kind of waste. In other words, we can say that it is a mechanical action on solid materials with the purpose of their destruction. Crushers crush almost any material into smaller pieces. This machine comes in different configurations for large, medium and fine crushing. Crusher hammer is used for crushing technology or mineral raw materials with medium hardness of little (up to 8%) moisture. Crusher can be installed both indoors and outdoors under a canopy.


Rotary crusher

sl3Rotary toothed crusher is a modification of the rotary crusher. Its major work items are toothed segments rigidly fixed on the rotor, which crush the material. Due to their reliability and high performance, such crushers are most widely used in enrichment of coals and coal division into factions, in grinding any lumpy brittle materials and sedimentary rocks, such as limestone, fire clay, feldspar, various shales. They are also effective at crushing of construction waste, broken bricks, limestone, tiles, breeze blocks, concrete foam and concrete rubble, asphalt.


Coal in bags (graded high-quality)

sl3We offer high-quality clean coal of grades D (long-flaming) and B3 (brown coal, lignite). In view of various objectives and buyers requests, coal is packed in bags of 10, 25 and 50 kg. Coal fraction is 5-25, 20-40, 40-80 mm. Qualitative characteristics will satisfy the most demanding customer.



sl3We carry out regular deliveries to the territory of Ukraine and to other countries of Kazakh coal of grade D (50-200 mm). The delivered high-quality coal has high quality characteristics: ash 10%, volatile 46%, sulfur 0.4-0.8%, calorific value 5000-6000 kcal/kg.