|
|
The tunnel is designed for mechanization of the process of cooling of the products at the enterprises.
THE PRINCIPLE OF WORK.
The conveyor is driven by an electric motor and reducer. Products for cooling are fitted on the conveyor belt on the left side of the machine entering the zone of work aircooling. Cooled products are served by conveyor belt on the table of assembling finished product. The volume of supply of cooled air is regulated with the help of a remote control with the use of microprocessor (output temperature in the chamber, working condition of the unit, the reasons of failures; the assignment of the required temperature in the chamber, parameters defrost and other parameters of the compressor - condenser unit. The required temperature inside the cooling chamber is achieved through the recirculation of cooling air.
- Air coolers
- Geared motor
- Without pneumatic, stretch tape manual to guide.
The sides of the tunnel can be opened on both sides. Sandwich panels with high strength, durability and reliable freeze isolation are used as an insulating material.
|
Technical characteristics |
CC-1/600 | CC-1/800 | CC-1/1000 |
|
Belt width, mm |
600 | 800 | 1000 |
|
Moving speed m/min |
6-50 | 6-50 | 6-50 |
|
Working height, mm |
500 | 600 | 750 |
|
Power of conveyor, W |
380 | 380 | 380 |
|
Power of cooling fan, W |
0,2 | 0,2 | 0,2 |
|
Power of electric motor, kW |
2.2-15 | 4-17 | 4-30 |
|
Roller diameter, mm |
89 | 89 | 89 |