Shredder

Shredders (industrial) is used for preliminary (initial) crushing of materials. Depending on the purpose of shredders can be with one roll, with two rolls or with four rolls. Using shredders can grind various polymers, fabrics, rubber, paper, cardboard, solid domestic wastes, wastes of woodworking, furniture, appliances.

Twin-shaft shredder is a device equipped with two rotating in different directions ramparts.
During the work of the Twin-shaft shredder waste is fed into two rotating in the opposite side of the shaft, which are equipped with cutting discs with teeth.

They are placed so that the cutting wheel of one of the shafts is between two disks other shaft. Knives seize material, advancing it on shafts Schroeder. Bumpers clean the knives. Pouring the material down is ensured by the drives.

In two-shaft schröder material can fragmentation as the transverse and longitudinal. The number of teeth and the width of the disk determines the size of the ground up faction.

Price list

Industrial shredders driven by one electric motor

Model	IS-1-7,5w	IS-1-15	IS-1-30w	IS-1-45w
Typ	Industrial one-shaft	Industrial two-shaft	Industrial two-shaft	Industrial two-shaft
Number of elektric motors	1	1	1	1
Power, kW	7,5	15	30	45
Output fraction size, mm*	0-50	0-15	0-50	0-50
Autoreverse	+	+	+	+
Thermal motor protection	+	+	+	+
Reducer	Ц3У-200	Ц3У-250	Ц3У-355	Ц3У-400
Pinflexiblecoupling	№10	№11	№13	№13
Working chamber, length x width, mm **	500х400	450x600	1025х880	1025х880
Shaft rotation speed, rpm	24-27	24-27	24-27	24-27
Rotation speed adjustment***	+ ***	+ ***	+ ***	+ ***
Thesoftstarter***	+ ***	+ ***	+ ***	+ ***
Movable knives	h=10 mm - 24 pcs.	h=10 mm - 40 pcs.	h=20 mm - 24 pcs.	h=20 mm - 24 pcs.
Unmovable knives	h=10 mm - 25 pcs.	h=10 - 40 pcs.	h=20 mm - 25 pcs.	h=20 mm - 25 pcs.
Lock overload	+	+	+	+
Overload signal	+	+	+	+
Overall demensions, length x width x haigth, mm	1250х1250х1500	2000x1000x1800	1850х1000х1700	2250х1500х2000
Mass, kg	500	1000	1250	1900

* - the sizу of the main fraction
** - the size of the working chamber can be changed by agreement
*** - installed by agreement

Industrial shredders driven by two electric motors

Model	IS-2-15	IS-2-18	IS-2-22		IS-2-30	IS-2-37	IS-2-45
Typ	Industrial two-shaft	Industrial two-shaft	Industrial two-shaft		Industrial two-shaft	Industrial two-shaft	Industrial two-shaft
Number of elektric motors	2	2	2		2	2	2
Power, kW	15	18,5	22		30	37	45
Output fraction size, mm*	0-15	0-30	0-30	0-60	0-60	0-60	0-60	0-75
Autoreverse	+	+	+		+	+	+
Thermal motor protection	+	+	+		+	+	+
Reducer	Ц3У-250	Ц3У-315	Ц3У-315		Ц3У-355	Ц3У-400Н	Ц3У - 450
Pinflexiblecoupling	№12	№12	№12		№13	№13	№13
Working chamber, length x width, mm **	740x680	740x680	880х680		880x880	1465х880	1465х880
Shaft rotation speed, rpm	24-27	19-23	19-23		15-19	15-19	12
Rotation speed adjustment***	+ ***	+ ***	+ ***		+ ***	+ ***	+ ***
Thesoftstarter***	+ ***	+ ***	+ ***		+ ***	+ ***	+ ***
Movable knives	h=10 mm - 68 pcs.	h=20 mm - 36 pcs.	h=20 mm 40 pcs.	h=40 mm 20 pcs.	h=40 mm - 20 pcs.	h=40 mm - 35 pcs.	h=40 mm 35 pcs.	h=50 mm 28 pcs.
Unmovable knives	h=9 mm - 68 pcs.	h=19 mm - 36 pcs.	h=19 mm 40 pcs.	h=39 mm 20 pcs.	h=39 mm - 20 pcs.	h=39 mm - 35 pcs.	h=39 mm 35 pcs.	h=49 mm 28 pcs.
Lock overload	+	+	+		+	+	+
Overload signal	+	+	+		+	+	+
Overall demensions, length x width x haigth, mm	2700x1000x1800	3000x1200x2000	3500x1250x2250		4000x1500x2250	5500x1750x2250	5500x2000x2250
Mass, kg	1400	2000	3000		3800	5250	7500

* - the sizу of the main fraction
** - the size of the working chamber can be changed by agreement
*** - installed by agreement