+38 (050) 477 83 88

UA | KZ | RU | EN

CHARCOAL FURNACE

lnn5

Recently, in many industrial and domestic sectors of the economy, the need for high-quality charcoal has been increasing. The main problem of obtaining charcoal is the imperfection of the primitive charcoal furnaces used in the production, which create problems during operation associated with poor quality, uneven burning of wood, long cooling time of finished coal, uneconomic and non-ecological production process. Our company offers a constructively new charcoal furnace, which successfully solves most of the problems of charcoal production.

Structurally, the furnace is divided into external and internal heat chambers. The external heat chamber is equipped with a firebox for starting and maintaining the pyrolysis process. The internal heat chamber is a sealed, replaceable retort, which, after passing the pyrolysis process, is removed from the external heat chamber and set aside for cooling, and the next replaceable internal retort loaded with a new batch of wood is dropped in its place. The set of equipment includes 3 replaceable retorts, which allows the pyrolysis process to be carried out continuously and provides the furnace productivity up to 1.5-2 tons of finished coal per day. The cooling time of each retort is about 10 hours. The time for complete carbonization of the volume of one retort is 6-8 hours. The use of three replaceable retorts allows using the external heat chamber continuously, carbonizing 3-4 volumes of the internal retort in 24 hours. The carbonation and cooling process takes place simultaneously. The bodies of the internal retorts and hermetic lids are made of heat-resistant steel. Air/water filters are installed to ensure the economy and environmental friendliness of our charring furnace. To remove excess combustible gas, an exhaust system with outlet nozzles is provided. For the convenience of loading and unloading removable retorts, the furnace is equipped with a set of lifting equipment, with a lifting capacity of 3 tons.

 

Charring furnace of vertical type.
Internal retort size Ø1400  L 1700 мм

Total power of electric engines

2,5 kW
Furnace productivity 1.5-2 tons per day
 №  Completeness Kit pcs
 1 Outdoor heat chamber kit 1
 2 Internal retorts with lids 3
 3 Lifting equipment kit (3t) 1
 4 Cleaning system reservoir 2
 5 Blower control fan 1
 6 Excess gas removal system kit 1

 

Charring furnace of horizontal type.
Internal retort size Ø1500  L 3000 мм

Total power of electric engines

3,5 kW
Furnace productivity 1.5-2 tons per day
 №  Completeness Kit pcs
 1 Outdoor heat chamber kit 1
 2 Internal retorts with lids 3
 3 Loading trolley 1
 4 Cleaning system reservoir 2
 5 Blower control fan 1
 6 Excess gas removal system kit 1

 

 

uglepech